Home network for personnel


Opening account

1. Please make sure that the broadband is accessed. Call at 6182330 ( the Network Center) if there is any problem of uncertainty

2. Download and file the application for Network Access and print it. Go to the Technical Service Department in Jimei District of Cernet Corporation with the file , employee’s card and copy of ID card ( Location: the Service Hall of Network Center , second floor ,A section of Jihen Building , main campus) to gain the account and password for home network.

3. Methods of network connection:

No1. (1) connect with router ( a terminal, such as phone, computer, laptop and so on ).

(2) Configure to get IP address automatically in your Router Settings

(3) Use any terminal to connect the wireless signal and enter the password and account of the home network for personnel on the pop-up WEB authentication page, then it isavailableafter authentication succeeds and there’ll be need for more authentication for other terminals.

No.2 Direct connection.

  1. Connect the network port in the wall with the one in the computer or laptop.

  2. Configure to get the ID address automatically.

  3. Authentication with the password and account of home network for personnel on the pop-up WEB authentication page; install Client Authentication (in the downloading zone of the Network Center Website)and enter with password and account of home network for personnel.

    Payment

    1.By PC or logging in http://user.jmu.edu.cn/HomeService/

    2.Pay by cash at the Technical Service Department(Location: the Service Hall of Network Service , second floor ,A section of Jihen Building , main campus)

    3.Transfer the scientific research funds at the Service Hall of Network Center.

    Recovery

  4. If the initial password was changed at the Technical Service Department(Location: the Service Hall of Network Service , second floor ,A section of Jihen Building , main campus), you can log in theOnline Business Hall of Carnet (Jimei University)to recover the internet.

  5. Go to the Technical Service Department(Location: the Service Hall of Network Center , second floor ,A section of Jchen Building , main campus) with the file , employee’s card and copy of ID card.

    Closing the account

    Go to the Technical Service Department(Location: the Service Hall of Network Center , second floor ,A section of Jchen Building , main campus) with the file , employee’s card and copy of ID card.